📍 Bedian Road, DHA Phase 6, Lahore — Near DHA Phase 5-6 Interchange +92 323 4148908  |  WhatsApp
FB Marble & Granite logo
Materials Marble Granite Quartz Porcelain Blog All Stone Guides Contact Request a Quote
Care & Maintenance

How to Clean a Granite (Composite) Sink and Restore Its Shine

Granite composite sinks look stylish and resist scratches, but they can develop limescale, food stains and a dull, chalky film over time — especially in dark colours and areas with hard water. Here is how to clean them and bring back their rich colour.

By FB Marble & Granite, Lahore··2 min read
Marquina Black Granite slab from FB Marble Lahore, suited to clean black granite composite sink
Marquina Black Granite from our stock in Lahore. Ideal for: clean black granite composite sink.

What Is a Granite Sink?

Most "granite sinks" are composite sinks made of about 80% crushed granite or quartz bonded with acrylic resin. They are dense, matte and non-porous, but their surface can hold mineral deposits and stains.

Daily Cleaning

  1. Rinse the sink after use to remove food particles.
  2. Wash with warm water, a few drops of dish soap and a soft sponge.
  3. Rinse thoroughly.
  4. Dry with a soft cloth to prevent water spots — especially important with hard water.

Granite Sinks: What to Know

  • Avoid abrasive pads and steel wool.
  • Avoid harsh chemicals such as bleach and drain cleaners left sitting in the sink.
  • Do not leave tea bags, coffee grounds or haldi-stained utensils sitting for hours, especially in light-coloured sinks.
  • Avoid placing very hot pans directly in an empty sink.

Cleaning Stubborn Stains

Step 1: Rinse and Wet the Sink

Step 1: Baking soda scrub – clean granite sink
Step 1: Baking soda scrub
Step 2: Rinsing sink – clean granite sink
Step 2: Rinsing sink
Step 3: Oiling sink for shine – clean granite sink
Step 3: Oiling sink for shine

Remove debris and wet the entire surface.

Step 2: Apply Baking Soda

Sprinkle baking soda over stains and limescale, then scrub gently with a soft sponge or brush.

Step 3: Treat Limescale

For white mineral deposits, spray a mix of equal parts white vinegar and water, leave for a few minutes, then scrub gently. (This is for the composite sink only — keep vinegar off your granite or marble countertop.)

Step 4: Rinse and Restore

Rinse thoroughly with warm water and dry. To restore a deep colour on dark sinks, apply a few drops of mineral or cooking oil on a soft cloth and buff the surface. This reduces the chalky look and helps repel water.

Preventing Problems

  • Dry the sink after the last use each day
  • Use a sink grid to protect the base
  • Install a water softener in very hard-water areas
  • Clean weekly with baking soda

Talk to FB Marble

FB Marble & Granite has supplied and installed natural stone across Pakistan since 2001. Visit our showroom at 51 Y Jamun, Bedian Road, near the DHA Phase 5-6 Interchange, Lahore, or WhatsApp +92 323 4148908 with your measurements for a free quote. Browse our granite, marble, quartz, porcelain and onyx collections on fbmarble.com.

Frequently asked questions

Why does my black sink look white and chalky?

Limescale from hard water — use the vinegar method and dry daily.

Can I use bleach?

Occasionally and diluted, but rinse immediately.

Does FB Marble install composite sinks?

Yes, as part of countertop installation.

Pinterest graphic: How to Clean a Granite (Composite) Sink and Restore Its Shine – FB Marble guide
Save this guide for later

Pin it to your home-renovation board so it is ready when you visit the stone yard.

Save to Pinterest

Want to see these stones in person?

Visit our showroom at Bedian Road, DHA Phase 6, Lahore, ask for free samples, or send us your measurements for a quote.

Keep reading

More Care & Maintenance articles →

💬 WhatsApp