📍 Bedian Road, DHA Phase 6, Lahore — Near DHA Phase 5-6 Interchange +92 323 4148908  |  WhatsApp
FB Marble & Granite logo
Materials Marble Granite Quartz Porcelain Blog All Stone Guides Contact Request a Quote
Care & Maintenance

How to Clean Granite: Steps and More

Granite is one of the easiest natural stones to care for. Once you know a few basic rules about what to use and what to avoid, keeping it clean takes only a minute a day. Here is a complete guide.

By FB Marble & Granite, Lahore··2 min read
Emerald Pearl Granite slab from FB Marble Lahore, suited to cleaning granite counter
Emerald Pearl Granite from our stock in Lahore. Ideal for: cleaning granite counter.

What You Should Never Use on Granite

  • Vinegar, lemon and other acids — they weaken the sealer.
  • Bleach and ammonia — they can dull the surface and break down the sealer.
  • Abrasive powders, steel wool and scouring pads — they scratch the polish.
  • Bathroom descalers and toilet cleaners — highly acidic and damaging.
  • Oven cleaners and strong degreasers — highly alkaline.
  • Furniture polish and wax sprays — they leave a cloudy film.

What You Should Use

  • Warm water and a few drops of mild dish soap
  • Microfibre cloths and soft sponges
  • A pH-neutral stone cleaner for weekly cleaning
  • Isopropyl alcohol (diluted 1:1) for disinfecting
  • Baking soda for poultices
Step 1: Soap and water – how to clean granite
Step 1: Soap and water
Step 2: Water test – how to clean granite
Step 2: Water test

How to Clean Granite Daily

  1. Wipe away crumbs and loose debris.
  2. Clean with warm soapy water in circular motions.
  3. Rinse with a clean damp cloth to remove soap film.
  4. Dry and buff with a microfibre towel.

Weekly Cleaning

Spray a pH-neutral granite cleaner across the counter, leave it for a minute and wipe. Pay attention to the cooking area, where oil mist builds up.

How to Remove Stains from Granite

  • Oil and grease: baking soda and water poultice, left 24–48 hours under plastic wrap.
  • Organic stains (tea, coffee, haldi): baking soda with hydrogen peroxide poultice.
  • Rust: a stone-safe rust remover.
  • Water marks: let them dry; most disappear.
  • Ink: isopropyl alcohol or acetone on dark granite.

How to Seal Granite

  1. Clean the counter and let it dry for 24 hours.
  2. Apply a penetrating granite sealer evenly.
  3. Let it soak in for the time on the label.
  4. Wipe off all excess.
  5. Allow 24–48 hours to cure.

How to Know When Granite Needs Resealing

Do the water-drop test: place a few drops of water on the counter and wait 10–15 minutes. If the stone darkens, it is absorbing water and needs resealing. Light granites typically need sealing once a year; dark granites less often.

Get a Free Quote from FB Marble

Send a simple sketch with measurements on WhatsApp (+92 323 4148908) and we will reply with the best rate, usually within hours. You are welcome to visit our Lahore showroom on Bedian Road to see the stone in person. More guides and products are available at fbmarble.com.

Frequently asked questions

How often should I clean granite?

Wipe daily; deep clean weekly.

Can I use Dettol?

Diluted and briefly, then rinse — alcohol is better for regular disinfecting.

Does dark granite need sealing?

Less often, but test it periodically.

Pinterest graphic: How to Clean Granite: Steps and More – FB Marble guide
Save this guide for later

Pin it to your home-renovation board so it is ready when you visit the stone yard.

Save to Pinterest

Want to see these stones in person?

Visit our showroom at Bedian Road, DHA Phase 6, Lahore, ask for free samples, or send us your measurements for a quote.

Keep reading

More Care & Maintenance articles →

💬 WhatsApp