📍 Bedian Road, DHA Phase 6, Lahore — Near DHA Phase 5-6 Interchange +92 323 4148908  |  WhatsApp
FB Marble & Granite logo
Materials Marble Granite Quartz Porcelain Blog All Stone Guides Contact Request a Quote
Care & Maintenance

Countertop Refinishing: An Introduction

Refinishing your existing countertops can give them a fresh look at a fraction of the cost of replacement. The process depends heavily on the countertop material. Here is an introduction.

By FB Marble & Granite, Lahore··2 min read
Walnut Travertine slab from FB Marble Lahore, suited to countertop being refinished
Walnut Travertine from our stock in Lahore. Ideal for: countertop being refinished.

Significant Savings

Replacing countertops involves new material, fabrication, removal of old tops and installation. Refinishing restores or changes the surface of the existing counter, often at a much lower cost and with less disruption.

Countertop Material Determines the Refinishing Process

Natural Stone (Granite, Marble, Quartzite)

Before/after refinished granite – countertop refinishing infographic by FB Marble
Before/after refinished granite.

Natural stone is the best candidate for refinishing because it can be restored repeatedly:

  • Deep cleaning and stain removal with poultices
  • Chip and crack repair with colour-matched epoxy
  • Honing and polishing with diamond pads to remove scratches, etching and dullness
  • Changing the finish — polished to honed or leathered-look
  • Resealing

The result can look nearly new. FB Marble offers stone restoration in Lahore.

Laminate

Laminate can be painted with special refinishing kits, but results are temporary and can chip. Replacement with granite or quartz is often a better long-term investment.

Wood

Wooden countertops can be sanded and re-oiled or re-sealed to remove stains and scratches.

Epoxy Coatings

Some refinishing systems coat old countertops with epoxy for a new look. They can look attractive initially but may scratch, yellow or peel over time and are not suitable for high-heat cooking.

Quartz

Quartz can be cleaned and minor damage repaired, but its surface cannot be refinished as extensively as natural stone.

DIY or Contractor?

DIY is suitable for:

  • Cleaning and stain removal
  • Small chip repairs
  • Light polishing
  • Sealing

A contractor is recommended for:

  • Honing and polishing whole countertops
  • Crack repairs
  • Seam repairs
  • Changing finishes

When Refinishing Isn't Enough

If the countertop is structurally cracked, badly damaged or no longer fits your layout, replacement is the better choice. Old stone can often be reused elsewhere.

Get a Free Quote from FB Marble

Send a simple sketch with measurements on WhatsApp (+92 323 4148908) and we will reply with the best rate, usually within hours. You are welcome to visit our Lahore showroom on Bedian Road to see the stone in person. More guides and products are available at fbmarble.com.

Frequently asked questions

Can granite be refinished?

Yes — it is one of the best materials to refinish.

How long does refinishing take?

Usually one day for a kitchen.

Does FB Marble refinish countertops?

Yes, in Lahore.

Pinterest graphic: Countertop Refinishing: An Introduction – FB Marble guide
Save this guide for later

Pin it to your home-renovation board so it is ready when you visit the stone yard.

Save to Pinterest

Want to see these stones in person?

Visit our showroom at Bedian Road, DHA Phase 6, Lahore, ask for free samples, or send us your measurements for a quote.

Keep reading

More Care & Maintenance articles →

💬 WhatsApp