Care & Maintenance

How to Repair a Chip in a Granite Countertop

Granite is one of the toughest countertop materials, but a heavy pot, a cast-iron tawa or a dropped bottle hitting the edge can still knock out a small chip. The good news is that small chips are easy to repair, and the result can be almost invisible. Here is how.

By FB Marble & Granite, Lahore·18 October 2026·2 min read

Cosmo Granite slab from FB Marble Lahore, suited to chipped granite edge — Cosmo Granite from our stock in Lahore. Ideal for: chipped granite edge.

Assess the Damage

Small chips — up to the size of a fingernail — on the edge or surface can usually be repaired at home with an epoxy kit. Large chips, cracks across the slab or chips on very visible front corners look best when repaired by professionals.

What You Need

A granite chip repair kit (clear or colour-matched epoxy and hardener)
Isopropyl alcohol and a clean cloth
Masking tape
A new single-edge razor blade
Fine polishing pad or granite polish
The broken piece, if you still have it

Step 1: Cleaning chip area – repair chip granite — Step 1: Cleaning chip area

Step 2: Filling chip with epoxy – repair chip granite — Step 2: Filling chip with epoxy

Step 3: Scraping flush with razor – repair chip granite — Step 3: Scraping flush with razor

Step 1: Clear the Area

Remove everything near the chip so you have room to work and nothing gets glued by accident.

Step 2: Clean the Chip

Clean the chip and surrounding area thoroughly with isopropyl alcohol to remove grease, food and dust. Let it dry completely. A clean, dry surface is essential for the epoxy to bond.

Step 3: Reattach the Piece (If You Have It)

If you saved the broken fragment and it fits cleanly, glue it back with a thin layer of epoxy and hold it in place with masking tape until it sets. This often gives the best result.

Step 4: Fill the Chip with Epoxy

Mix the epoxy and hardener according to the kit instructions. For edge chips, apply masking tape below the chip to create a small "dam" that holds the epoxy in place. Fill the chip so the epoxy sits slightly above the surface.

Step 5: Let It Cure

Allow the epoxy to harden as directed — often a few hours. Avoid touching or wetting it during this time.

Step 6: Scrape Flush

Hold the razor blade almost flat against the granite and gently shave off the excess epoxy until it is level with the surrounding surface.

Step 7: Polish

Buff the repaired area with a fine polishing pad or a little granite polish to blend the shine.

When to Call a Professional

Choose professional repair for large chips, cracks, chips at seams or corners of islands, and chips on premium or exotic granites where colour matching is critical. FB Marble's team uses tinted resins and machine polishing for near-invisible repairs.

Prevention

Use rounded edges in busy kitchens, avoid sitting on counter edges, and lift heavy pots rather than sliding them over the edge.

Need Help Choosing?

Our team at FB Marble will help you compare samples, check full slabs and plan your project from measurement to installation. Call or WhatsApp +92 323 4148908, or visit fbmarble.com to explore our collections and request free samples.