📍 Bedian Road, DHA Phase 6, Lahore — Near DHA Phase 5-6 Interchange +92 323 4148908  |  WhatsApp
FB Marble & Granite logo
Materials Marble Granite Quartz Porcelain Blog All Stone Guides Contact Request a Quote
Care & Maintenance

How to Polish Granite Countertops at Home

Over time, granite can lose some of its shine due to residue, wear and worn sealer. Polishing at home can restore much of its gloss. For deep restoration, professionals use machines and diamond pads — but here is what you can do yourself.

By FB Marble & Granite, Lahore··2 min read
Silver Eye Granite slab from FB Marble Lahore, suited to polishing granite with pad
Silver Eye Granite from our stock in Lahore. Ideal for: polishing granite with pad.

Before You Polish

  1. Clear the counter. Remove all items.
  2. Clean thoroughly. Use warm soapy water to remove grease and residue; rinse and dry.
  3. Remove stains. Treat any stains with poultices first — polishing will not remove stains.
  4. Check for sealer haze. If the surface is cloudy from old sealer, remove it with a little fresh sealer and wipe off immediately.
  5. Let it dry completely.
Step 1: Cleaning before polishing – polish granite at home
Step 1: Cleaning before polishing
Step 2: Applying polish – polish granite at home
Step 2: Applying polish

How to Polish Granite

Option 1: Granite Polish Products

  1. Spray or apply a granite polish evenly.
  2. Spread it in small circles with a soft microfibre cloth.
  3. Buff with a clean, dry cloth until glossy.

This adds a light protective layer and enhances shine — ideal for regular maintenance.

Option 2: Polishing Powder or Compound

For dull areas:

  1. Sprinkle a small amount of granite polishing powder.
  2. Add a few drops of water to make a paste.
  3. Rub with a felt pad or buffing pad in circular motions.
  4. Rinse and dry.

What Is Dry Polishing?

Dry polishing uses resin-bonded diamond pads on a variable-speed polisher without water. It is convenient indoors because there is no water mess, but it creates dust and heat, so it requires skill and good ventilation.

What Is Wet Polishing?

Wet polishing uses water to cool the pads and capture dust. It generally gives a better finish and extends pad life, but it is messier. Professionals often prefer wet polishing for countertops.

Tips

  • Work in small sections.
  • Use low speed with machines to avoid overheating.
  • Keep pads flat to avoid uneven spots.
  • Progress through grits gradually (if using diamond pads).
  • Reseal after polishing.

When to Call a Professional

  • Deep scratches or widespread dullness
  • Large areas or entire kitchens
  • Dark granites where uneven polishing would show
  • Seams that need refilling

FB Marble provides professional granite polishing and restoration in Lahore.

Get a Free Quote from FB Marble

Send a simple sketch with measurements on WhatsApp (+92 323 4148908) and we will reply with the best rate, usually within hours. You are welcome to visit our Lahore showroom on Bedian Road to see the stone in person. More guides and products are available at fbmarble.com.

Frequently asked questions

How often should I polish granite?

Light polish monthly; professional polishing only when needed.

Can I use car polish?

No.

Does polishing replace sealing?

No — reseal after polishing.

Pinterest graphic: How to Polish Granite Countertops at Home – FB Marble guide
Save this guide for later

Pin it to your home-renovation board so it is ready when you visit the stone yard.

Save to Pinterest

Want to see these stones in person?

Visit our showroom at Bedian Road, DHA Phase 6, Lahore, ask for free samples, or send us your measurements for a quote.

Keep reading

More Care & Maintenance articles →

💬 WhatsApp