1. Clear the Cabinets
Empty every drawer and cabinet, especially under the sink and in corners. Installers often need to reach inside to fix supports, apply adhesive and clamp joints. Clearing in advance saves time and protects your crockery.
2. Remove Old Countertops
If you are replacing an existing top, decide whether you or the installer will remove it. Removing it a day or two early lets you inspect the cabinet frames for water damage, termites or loose joints and fix them before the new stone goes on.


3. Level the Cabinets
Use a long spirit level across the front, back and sides of every cabinet run. Granite does not bend; a slab resting on uneven cabinets is under stress and can crack when weight is added. Adjust cabinet legs or add shims until everything is level within a couple of millimetres.

4. Add Supporting Material
Granite is heavy โ roughly 12 to 15 kg per square foot at 18โ20 mm thickness. Make sure cabinet side panels are strong and well fixed. Add plywood or steel supports for long spans, gaps where a dishwasher or washing machine will sit, and any overhang wider than about 25โ30 cm. Masonry (brick) counters must be flat, fully cured and free of loose plaster.
5. Remove Plumbing and Appliances
Disconnect the sink, taps and any built-in hob. Turn off gas and water supplies. Move fridges, ovens and microwaves away from the work area so installers have room to carry slabs safely.
6. Secure Cabinet Doors and Drawers
Remove or tape cabinet doors so they do not swing open and get scratched while heavy slabs are moved in.
7. Clear a Path
Make sure the route from the gate to the kitchen is clear. Slabs are carried on edge, so doorways, stair turns and corridors need space. Tell us in advance about lifts, narrow stairs or upper floors.
8. Be Present on Installation Day
Be at home to confirm the sink position, overhang, joint locations and backsplash height before adhesive is applied. Small decisions made on the day are much easier than changes afterwards.
After Installation
Avoid heavy use for about 24 hours while adhesives cure. Do not stand on the counter, and wait for the plumber to reconnect the sink properly with silicone.
Get a Free Quote from FB Marble
Send a simple sketch with measurements on WhatsApp (+92 323 4148908) and we will reply with the best rate, usually within hours. You are welcome to visit our Lahore showroom on Bedian Road to see the stone in person. More guides and products are available at fbmarble.com.


