Frequently Asked Questions

At FB Marble, samples are free and we encourage our clients to take up to ten samples per visit to our showroom in Lahore. You can also request samples via WhatsApp and we will arrange delivery.

FB Marble carries slabs and tiles of granite, marble, quartzite, onyx, travertine, limestone, porcelain, and soapstone. We have Pakistan's largest natural stone selection with 500+ colours available.

Since every slab of natural stone is completely unique, we recommend visiting our Lahore showroom to see slab patterns and colour variations in person. What you see online is representative — the actual slab may vary slightly in pattern.

At FB Marble we source our stone from the most reputable quarries globally, including those from India, Brazil, Norway, Italy, Spain, South Africa, Ukraine, and locally from Pakistan.

Stone slabs that are extremely rare and boast unique colours tend to be more expensive than commonly found stones. Imported stones also carry additional logistics costs compared to locally quarried Pakistani granite.

We recommend sealing granite countertops at least once each year. Lighter granite colours may require more frequent sealing, as often as every 6 months, as they tend to be more porous than darker granites.

Granite is one of the best natural stones for outdoor use — it can be used for outdoor kitchens, BBQ areas, bars and other applications. We recommend covering outdoor granite countertops during extreme weather conditions.

You can cut and chop directly on your granite countertops, however it is not recommended as it may result in damage to your knives. Granite is extremely hard and will dull knife blades very quickly.

Granite is a highly heat resistant material and can withstand extremely hot temperatures. However, it is not advised to place very hot pots and pans directly onto the stone as it might remove the sealer and could potentially cause thermal shock in some cases.

A solution of warm water and mild dish soap is recommended for daily cleaning of granite countertops. We advise against using any acidic or abrasive chemicals as they may remove the surface layer of the sealer and in extreme cases may damage the polish of the stone.

Most chips smaller than a coin in diameter can be repaired using a stone chip repair kit. We recommend professional repair service for larger chips. Contact FB Marble for a referral to our trusted stone repair specialists.

Marble is calcite, so lemon, vinegar, imli, achar and tomato leave dull etch marks on a polished surface, and haldi can stain light marble. It is best for floors, walls, stairs and vanities; for the main cooking counter, granite or quartz is more practical.

Yellowing comes from iron minerals in the stone oxidising, from dirty mop water and wax building up, or from the wrong sealer. Use a non-yellowing penetrating sealer and pH-neutral cleaner; a professional grind-and-polish restores the original colour.

Pakistani marbles such as Ziarat White, Badal and Sunny Grey are quicker to supply in large quantities and usually cost less, which suits whole-house flooring. Imported marbles (Botticino, Crema Marfil, Grey Emperador) offer colours that are not quarried locally.

Busy floors usually need a diamond grind-and-polish every few years; regular cleaning with a pH-neutral cleaner and doormats at entrances keeps grit from dulling the surface in between.

Quartz handles warm dishes, but its resin binder can scorch or discolour above roughly 150 °C. Always put hot pots, patilas and tawas on a trivet.

No. Engineered quartz absorbs almost no water, so it never needs sealing. Clean it with mild soap; avoid bleach, oven cleaner and paint stripper.

No. Strong UV light can slowly yellow the resin. For terraces and outdoor kitchens use granite or porcelain.

Quartz needs no sealing and resists stains, but needs trivets for hot pans. Granite takes direct heat better and suits heavy cooking, but needs periodic sealing, especially in light colours.

Our porcelain tiles range from 1200×2400mm up to large-format 1600×3200mm slabs, in thicknesses from 9mm to 12mm. Contact us for availability of specific sizes for your project.

Porcelain is non-porous and never needs sealing, unlike marble or granite. It also offers highly consistent colour and pattern since designs are digitally printed. Natural stone has more unique variation and a different tactile feel — both are excellent choices depending on your priorities.

Yes — we stock both polished and matt/textured finishes. Matt and flamed finishes offer better slip resistance and are recommended for bathroom floors, outdoor areas and high-traffic commercial spaces.

Yes, large-format porcelain slabs are increasingly popular for feature walls and book-matched installations, creating a seamless, joint-free look across large surfaces. Professional installation is recommended for large slabs.

Porcelain is denser and less porous than standard ceramic tile, giving it far greater resistance to scratching, chipping, staining and water absorption — making it suitable for both residential and heavy commercial traffic.

Porcelain tile prices vary based on size, finish and design. Contact us on WhatsApp or call +92 323 4148908 for the latest prices and bulk discounts. We offer competitive rates for contractors and developers.

Yes — travertine is a porous natural stone and we recommend sealing it after installation and re-sealing every 12–18 months, especially for filled and polished finishes, to protect against staining.

Yes, especially in tumbled, brushed or unfilled finishes, which offer better slip resistance. Travertine is a popular choice for pool decks, patios and outdoor walkways.

Filled travertine has its natural surface pores filled with resin or cement for a smooth, easy-to-clean finish. Unfilled travertine retains its natural open pores for a more rustic, textured look.

Use a pH-neutral stone cleaner with warm water. Avoid vinegar, lemon or other acidic cleaners, as they can etch and dull the surface of travertine over time.